rsys-ipmitool version 1.8.9 usage

rsys-ipmitool version 1.8.9

usage: rsys-ipmitool [options...]

       -h             This help
       -V             Show version information
       -v             Verbose (can use multiple times)
       -c             Display output in comma separated format
       -d N           Specify a /dev/ipmiN device to use (default=0)
       -I intf        Interface to use
       -H hostname    Remote host name for LAN interface
       -p port        Remote RMCP port [default=623]
       -U username    Remote session username
       -f file        Read remote session password from file
       -S sdr         Use local file for remote SDR cache
       -a             Prompt for remote password
       -e char        Set SOL escape character
       -C ciphersuite Cipher suite to be used by lanplus interface
       -k key         Use Kg key for IPMIv2 authentication
       -L level       Remote session privilege level [default=ADMINISTRATOR]
                      Append a '+' to use name/privilege lookup in RAKP1
       -A authtype    Force use of auth type NONE, PASSWORD, MD2, MD5 or OEM
       -P password    Remote session password
       -E             Read password from IPMI_PASSWORD environment variable
       -m address     Set local IPMB address
       -b channel     Set destination channel for bridged request
       -t address     Bridge request to remote target address
       -B channel     Set transit channel for bridged request (dual bridge)
       -T address     Set transit address for bridge request (dual bridge)
       -l lun         Set destination lun for raw commands
       -o oemtype     Setup for OEM (use 'list' to see available OEM types)
       -O seloem      Use file for OEM SEL event descriptions

Interfaces:

 open          Linux OpenIPMI Interface [default]
 imb           Intel IMB Interface
 lan           IPMI v1.5 LAN Interface
 lanplus       IPMI v2.0 RMCP+ LAN Interface

Commands:

 raw           Send a RAW IPMI request and print response
 i2c           Send an I2C Master Write-Read command and print response
 spd           Print SPD info from remote I2C device
 lan           Configure LAN Channels
 chassis       Get chassis status and set power state
 power         Shortcut to chassis power commands
 event         Send pre-defined events to MC
 mc            Management Controller status and global enables
 sdr           Print Sensor Data Repository entries and readings
 sensor        Print detailed sensor information
 fru           Print built-in FRU and scan SDR for FRU locators
 sel           Print System Event Log (SEL)
 pef           Configure Platform Event Filtering (PEF)
 sol           Configure and connect IPMIv2.0 Serial-over-LAN
 tsol          Configure and connect with Tyan IPMIv1.5 Serial-over-LAN
 isol          Configure IPMIv1.5 Serial-over-LAN
 user          Configure Management Controller users
 channel       Configure Management Controller channels
 session       Print session information
 sunoem        OEM Commands for Sun servers
 rsysoem       OEM Commands for RadiSys blades
 kontronoem    OEM Commands for Kontron devices
 picmg         Run a PICMG/ATCA extended cmd
 fwum          Update IPMC using Kontron OEM Firmware Update Manager
 firewall      Configure Firmware Firewall
 shell         Launch interactive IPMI shell
 exec          Run list of commands from file
 set           Set runtime variable for shell and exec
 hpm           Update HPM components using PICMG HPM.1 file
 fumi          Update HPM components with custom output for HPI FUMI support